1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401
//! `TcpStream` split support.
//!
//! A `TcpStream` can be split into a `ReadHalf` and a
//! `WriteHalf` with the `TcpStream::split` method. `ReadHalf`
//! implements `AsyncRead` while `WriteHalf` implements `AsyncWrite`.
//!
//! Compared to the generic split of `AsyncRead + AsyncWrite`, this specialized
//! split has no associated overhead and enforces all invariants at the type
//! level.
use crate::future::poll_fn;
use crate::io::{AsyncRead, AsyncWrite, Interest, ReadBuf, Ready};
use crate::net::TcpStream;
use std::io;
use std::net::{Shutdown, SocketAddr};
use std::pin::Pin;
use std::task::{Context, Poll};
cfg_io_util! {
use bytes::BufMut;
}
/// Borrowed read half of a [`TcpStream`], created by [`split`].
///
/// Reading from a `ReadHalf` is usually done using the convenience methods found on the
/// [`AsyncReadExt`] trait.
///
/// [`TcpStream`]: TcpStream
/// [`split`]: TcpStream::split()
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
#[derive(Debug)]
pub struct ReadHalf<'a>(&'a TcpStream);
/// Borrowed write half of a [`TcpStream`], created by [`split`].
///
/// Note that in the [`AsyncWrite`] implementation of this type, [`poll_shutdown`] will
/// shut down the TCP stream in the write direction.
///
/// Writing to an `WriteHalf` is usually done using the convenience methods found
/// on the [`AsyncWriteExt`] trait.
///
/// [`TcpStream`]: TcpStream
/// [`split`]: TcpStream::split()
/// [`AsyncWrite`]: trait@crate::io::AsyncWrite
/// [`poll_shutdown`]: fn@crate::io::AsyncWrite::poll_shutdown
/// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
#[derive(Debug)]
pub struct WriteHalf<'a>(&'a TcpStream);
pub(crate) fn split(stream: &mut TcpStream) -> (ReadHalf<'_>, WriteHalf<'_>) {
(ReadHalf(&*stream), WriteHalf(&*stream))
}
impl ReadHalf<'_> {
/// Attempts to receive data on the socket, without removing that data from
/// the queue, registering the current task for wakeup if data is not yet
/// available.
///
/// Note that on multiple calls to `poll_peek` or `poll_read`, only the
/// `Waker` from the `Context` passed to the most recent call is scheduled
/// to receive a wakeup.
///
/// See the [`TcpStream::poll_peek`] level documentation for more details.
///
/// # Examples
///
/// ```no_run
/// use tokio::io::{self, ReadBuf};
/// use tokio::net::TcpStream;
///
/// use futures::future::poll_fn;
///
/// #[tokio::main]
/// async fn main() -> io::Result<()> {
/// let mut stream = TcpStream::connect("127.0.0.1:8000").await?;
/// let (mut read_half, _) = stream.split();
/// let mut buf = [0; 10];
/// let mut buf = ReadBuf::new(&mut buf);
///
/// poll_fn(|cx| {
/// read_half.poll_peek(cx, &mut buf)
/// }).await?;
///
/// Ok(())
/// }
/// ```
///
/// [`TcpStream::poll_peek`]: TcpStream::poll_peek
pub fn poll_peek(
&mut self,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>,
) -> Poll<io::Result<usize>> {
self.0.poll_peek(cx, buf)
}
/// Receives data on the socket from the remote address to which it is
/// connected, without removing that data from the queue. On success,
/// returns the number of bytes peeked.
///
/// See the [`TcpStream::peek`] level documentation for more details.
///
/// [`TcpStream::peek`]: TcpStream::peek
///
/// # Examples
///
/// ```no_run
/// use tokio::net::TcpStream;
/// use tokio::io::AsyncReadExt;
/// use std::error::Error;
///
/// #[tokio::main]
/// async fn main() -> Result<(), Box<dyn Error>> {
/// // Connect to a peer
/// let mut stream = TcpStream::connect("127.0.0.1:8080").await?;
/// let (mut read_half, _) = stream.split();
///
/// let mut b1 = [0; 10];
/// let mut b2 = [0; 10];
///
/// // Peek at the data
/// let n = read_half.peek(&mut b1).await?;
///
/// // Read the data
/// assert_eq!(n, read_half.read(&mut b2[..n]).await?);
/// assert_eq!(&b1[..n], &b2[..n]);
///
/// Ok(())
/// }
/// ```
///
/// The [`read`] method is defined on the [`AsyncReadExt`] trait.
///
/// [`read`]: fn@crate::io::AsyncReadExt::read
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
pub async fn peek(&mut self, buf: &mut [u8]) -> io::Result<usize> {
let mut buf = ReadBuf::new(buf);
poll_fn(|cx| self.poll_peek(cx, &mut buf)).await
}
/// Waits for any of the requested ready states.
///
/// This function is usually paired with `try_read()` or `try_write()`. It
/// can be used to concurrently read / write to the same socket on a single
/// task without splitting the socket.
///
/// This function is equivalent to [`TcpStream::ready`].
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read or write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
self.0.ready(interest).await
}
/// Waits for the socket to become readable.
///
/// This function is equivalent to `ready(Interest::READABLE)` and is usually
/// paired with `try_read()`.
///
/// This function is also equivalent to [`TcpStream::ready`].
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn readable(&self) -> io::Result<()> {
self.0.readable().await
}
/// Tries to read data from the stream into the provided buffer, returning how
/// many bytes were read.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read()` is non-blocking, the buffer does not have to be stored by
/// the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. `Ok(0)` indicates the stream's read half is closed
/// and will no longer yield data. If the stream is not ready to read data
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read(&self, buf: &mut [u8]) -> io::Result<usize> {
self.0.try_read(buf)
}
/// Tries to read data from the stream into the provided buffers, returning
/// how many bytes were read.
///
/// Data is copied to fill each buffer in order, with the final buffer
/// written to possibly being only partially filled. This method behaves
/// equivalently to a single call to [`try_read()`] with concatenated
/// buffers.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read_vectored()` is non-blocking, the buffer does not have to be
/// stored by the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`try_read()`]: Self::try_read()
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. `Ok(0)` indicates the stream's read half is closed
/// and will no longer yield data. If the stream is not ready to read data
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read_vectored(&self, bufs: &mut [io::IoSliceMut<'_>]) -> io::Result<usize> {
self.0.try_read_vectored(bufs)
}
cfg_io_util! {
/// Tries to read data from the stream into the provided buffer, advancing the
/// buffer's internal cursor, returning how many bytes were read.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read_buf()` is non-blocking, the buffer does not have to be stored by
/// the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. `Ok(0)` indicates the stream's read half is closed
/// and will no longer yield data. If the stream is not ready to read data
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read_buf<B: BufMut>(&self, buf: &mut B) -> io::Result<usize> {
self.0.try_read_buf(buf)
}
}
/// Returns the remote address that this stream is connected to.
pub fn peer_addr(&self) -> io::Result<SocketAddr> {
self.0.peer_addr()
}
/// Returns the local address that this stream is bound to.
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.0.local_addr()
}
}
impl WriteHalf<'_> {
/// Waits for any of the requested ready states.
///
/// This function is usually paired with `try_read()` or `try_write()`. It
/// can be used to concurrently read / write to the same socket on a single
/// task without splitting the socket.
///
/// This function is equivalent to [`TcpStream::ready`].
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read or write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
self.0.ready(interest).await
}
/// Waits for the socket to become writable.
///
/// This function is equivalent to `ready(Interest::WRITABLE)` and is usually
/// paired with `try_write()`.
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn writable(&self) -> io::Result<()> {
self.0.writable().await
}
/// Tries to write a buffer to the stream, returning how many bytes were
/// written.
///
/// The function will attempt to write the entire contents of `buf`, but
/// only part of the buffer may be written.
///
/// This function is usually paired with `writable()`.
///
/// # Return
///
/// If data is successfully written, `Ok(n)` is returned, where `n` is the
/// number of bytes written. If the stream is not ready to write data,
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_write(&self, buf: &[u8]) -> io::Result<usize> {
self.0.try_write(buf)
}
/// Tries to write several buffers to the stream, returning how many bytes
/// were written.
///
/// Data is written from each buffer in order, with the final buffer read
/// from possible being only partially consumed. This method behaves
/// equivalently to a single call to [`try_write()`] with concatenated
/// buffers.
///
/// This function is usually paired with `writable()`.
///
/// [`try_write()`]: Self::try_write()
///
/// # Return
///
/// If data is successfully written, `Ok(n)` is returned, where `n` is the
/// number of bytes written. If the stream is not ready to write data,
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_write_vectored(&self, bufs: &[io::IoSlice<'_>]) -> io::Result<usize> {
self.0.try_write_vectored(bufs)
}
/// Returns the remote address that this stream is connected to.
pub fn peer_addr(&self) -> io::Result<SocketAddr> {
self.0.peer_addr()
}
/// Returns the local address that this stream is bound to.
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.0.local_addr()
}
}
impl AsyncRead for ReadHalf<'_> {
fn poll_read(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>,
) -> Poll<io::Result<()>> {
self.0.poll_read_priv(cx, buf)
}
}
impl AsyncWrite for WriteHalf<'_> {
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
self.0.poll_write_priv(cx, buf)
}
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[io::IoSlice<'_>],
) -> Poll<io::Result<usize>> {
self.0.poll_write_vectored_priv(cx, bufs)
}
fn is_write_vectored(&self) -> bool {
self.0.is_write_vectored()
}
#[inline]
fn poll_flush(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
// tcp flush is a no-op
Poll::Ready(Ok(()))
}
// `poll_shutdown` on a write half shutdowns the stream in the "write" direction.
fn poll_shutdown(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
self.0.shutdown_std(Shutdown::Write).into()
}
}
impl AsRef<TcpStream> for ReadHalf<'_> {
fn as_ref(&self) -> &TcpStream {
self.0
}
}
impl AsRef<TcpStream> for WriteHalf<'_> {
fn as_ref(&self) -> &TcpStream {
self.0
}
}