1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
use crate::io::util::DEFAULT_BUF_SIZE;
use crate::io::{AsyncBufRead, AsyncRead, AsyncSeek, AsyncWrite, ReadBuf};
use pin_project_lite::pin_project;
use std::io::{self, IoSlice, SeekFrom};
use std::pin::Pin;
use std::task::{Context, Poll};
use std::{cmp, fmt, mem};
pin_project! {
/// The `BufReader` struct adds buffering to any reader.
///
/// It can be excessively inefficient to work directly with a [`AsyncRead`]
/// instance. A `BufReader` performs large, infrequent reads on the underlying
/// [`AsyncRead`] and maintains an in-memory buffer of the results.
///
/// `BufReader` can improve the speed of programs that make *small* and
/// *repeated* read calls to the same file or network socket. It does not
/// help when reading very large amounts at once, or reading just one or a few
/// times. It also provides no advantage when reading from a source that is
/// already in memory, like a `Vec<u8>`.
///
/// When the `BufReader` is dropped, the contents of its buffer will be
/// discarded. Creating multiple instances of a `BufReader` on the same
/// stream can cause data loss.
#[cfg_attr(docsrs, doc(cfg(feature = "io-util")))]
pub struct BufReader<R> {
#[pin]
pub(super) inner: R,
pub(super) buf: Box<[u8]>,
pub(super) pos: usize,
pub(super) cap: usize,
pub(super) seek_state: SeekState,
}
}
impl<R: AsyncRead> BufReader<R> {
/// Creates a new `BufReader` with a default buffer capacity. The default is currently 8 KB,
/// but may change in the future.
pub fn new(inner: R) -> Self {
Self::with_capacity(DEFAULT_BUF_SIZE, inner)
}
/// Creates a new `BufReader` with the specified buffer capacity.
pub fn with_capacity(capacity: usize, inner: R) -> Self {
let buffer = vec![0; capacity];
Self {
inner,
buf: buffer.into_boxed_slice(),
pos: 0,
cap: 0,
seek_state: SeekState::Init,
}
}
/// Gets a reference to the underlying reader.
///
/// It is inadvisable to directly read from the underlying reader.
pub fn get_ref(&self) -> &R {
&self.inner
}
/// Gets a mutable reference to the underlying reader.
///
/// It is inadvisable to directly read from the underlying reader.
pub fn get_mut(&mut self) -> &mut R {
&mut self.inner
}
/// Gets a pinned mutable reference to the underlying reader.
///
/// It is inadvisable to directly read from the underlying reader.
pub fn get_pin_mut(self: Pin<&mut Self>) -> Pin<&mut R> {
self.project().inner
}
/// Consumes this `BufReader`, returning the underlying reader.
///
/// Note that any leftover data in the internal buffer is lost.
pub fn into_inner(self) -> R {
self.inner
}
/// Returns a reference to the internally buffered data.
///
/// Unlike `fill_buf`, this will not attempt to fill the buffer if it is empty.
pub fn buffer(&self) -> &[u8] {
&self.buf[self.pos..self.cap]
}
/// Invalidates all data in the internal buffer.
#[inline]
fn discard_buffer(self: Pin<&mut Self>) {
let me = self.project();
*me.pos = 0;
*me.cap = 0;
}
}
impl<R: AsyncRead> AsyncRead for BufReader<R> {
fn poll_read(
mut self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>,
) -> Poll<io::Result<()>> {
// If we don't have any buffered data and we're doing a massive read
// (larger than our internal buffer), bypass our internal buffer
// entirely.
if self.pos == self.cap && buf.remaining() >= self.buf.len() {
let res = ready!(self.as_mut().get_pin_mut().poll_read(cx, buf));
self.discard_buffer();
return Poll::Ready(res);
}
let rem = ready!(self.as_mut().poll_fill_buf(cx))?;
let amt = std::cmp::min(rem.len(), buf.remaining());
buf.put_slice(&rem[..amt]);
self.consume(amt);
Poll::Ready(Ok(()))
}
}
impl<R: AsyncRead> AsyncBufRead for BufReader<R> {
fn poll_fill_buf(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<&[u8]>> {
let me = self.project();
// If we've reached the end of our internal buffer then we need to fetch
// some more data from the underlying reader.
// Branch using `>=` instead of the more correct `==`
// to tell the compiler that the pos..cap slice is always valid.
if *me.pos >= *me.cap {
debug_assert!(*me.pos == *me.cap);
let mut buf = ReadBuf::new(me.buf);
ready!(me.inner.poll_read(cx, &mut buf))?;
*me.cap = buf.filled().len();
*me.pos = 0;
}
Poll::Ready(Ok(&me.buf[*me.pos..*me.cap]))
}
fn consume(self: Pin<&mut Self>, amt: usize) {
let me = self.project();
*me.pos = cmp::min(*me.pos + amt, *me.cap);
}
}
#[derive(Debug, Clone, Copy)]
pub(super) enum SeekState {
/// start_seek has not been called.
Init,
/// start_seek has been called, but poll_complete has not yet been called.
Start(SeekFrom),
/// Waiting for completion of the first poll_complete in the `n.checked_sub(remainder).is_none()` branch.
PendingOverflowed(i64),
/// Waiting for completion of poll_complete.
Pending,
}
/// Seeks to an offset, in bytes, in the underlying reader.
///
/// The position used for seeking with `SeekFrom::Current(_)` is the
/// position the underlying reader would be at if the `BufReader` had no
/// internal buffer.
///
/// Seeking always discards the internal buffer, even if the seek position
/// would otherwise fall within it. This guarantees that calling
/// `.into_inner()` immediately after a seek yields the underlying reader
/// at the same position.
///
/// See [`AsyncSeek`] for more details.
///
/// Note: In the edge case where you're seeking with `SeekFrom::Current(n)`
/// where `n` minus the internal buffer length overflows an `i64`, two
/// seeks will be performed instead of one. If the second seek returns
/// `Err`, the underlying reader will be left at the same position it would
/// have if you called `seek` with `SeekFrom::Current(0)`.
impl<R: AsyncRead + AsyncSeek> AsyncSeek for BufReader<R> {
fn start_seek(self: Pin<&mut Self>, pos: SeekFrom) -> io::Result<()> {
// We needs to call seek operation multiple times.
// And we should always call both start_seek and poll_complete,
// as start_seek alone cannot guarantee that the operation will be completed.
// poll_complete receives a Context and returns a Poll, so it cannot be called
// inside start_seek.
*self.project().seek_state = SeekState::Start(pos);
Ok(())
}
fn poll_complete(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<u64>> {
let res = match mem::replace(self.as_mut().project().seek_state, SeekState::Init) {
SeekState::Init => {
// 1.x AsyncSeek recommends calling poll_complete before start_seek.
// We don't have to guarantee that the value returned by
// poll_complete called without start_seek is correct,
// so we'll return 0.
return Poll::Ready(Ok(0));
}
SeekState::Start(SeekFrom::Current(n)) => {
let remainder = (self.cap - self.pos) as i64;
// it should be safe to assume that remainder fits within an i64 as the alternative
// means we managed to allocate 8 exbibytes and that's absurd.
// But it's not out of the realm of possibility for some weird underlying reader to
// support seeking by i64::MIN so we need to handle underflow when subtracting
// remainder.
if let Some(offset) = n.checked_sub(remainder) {
self.as_mut()
.get_pin_mut()
.start_seek(SeekFrom::Current(offset))?;
} else {
// seek backwards by our remainder, and then by the offset
self.as_mut()
.get_pin_mut()
.start_seek(SeekFrom::Current(-remainder))?;
if self.as_mut().get_pin_mut().poll_complete(cx)?.is_pending() {
*self.as_mut().project().seek_state = SeekState::PendingOverflowed(n);
return Poll::Pending;
}
// https://github.com/rust-lang/rust/pull/61157#issuecomment-495932676
self.as_mut().discard_buffer();
self.as_mut()
.get_pin_mut()
.start_seek(SeekFrom::Current(n))?;
}
self.as_mut().get_pin_mut().poll_complete(cx)?
}
SeekState::PendingOverflowed(n) => {
if self.as_mut().get_pin_mut().poll_complete(cx)?.is_pending() {
*self.as_mut().project().seek_state = SeekState::PendingOverflowed(n);
return Poll::Pending;
}
// https://github.com/rust-lang/rust/pull/61157#issuecomment-495932676
self.as_mut().discard_buffer();
self.as_mut()
.get_pin_mut()
.start_seek(SeekFrom::Current(n))?;
self.as_mut().get_pin_mut().poll_complete(cx)?
}
SeekState::Start(pos) => {
// Seeking with Start/End doesn't care about our buffer length.
self.as_mut().get_pin_mut().start_seek(pos)?;
self.as_mut().get_pin_mut().poll_complete(cx)?
}
SeekState::Pending => self.as_mut().get_pin_mut().poll_complete(cx)?,
};
match res {
Poll::Ready(res) => {
self.discard_buffer();
Poll::Ready(Ok(res))
}
Poll::Pending => {
*self.as_mut().project().seek_state = SeekState::Pending;
Poll::Pending
}
}
}
}
impl<R: AsyncRead + AsyncWrite> AsyncWrite for BufReader<R> {
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
self.get_pin_mut().poll_write(cx, buf)
}
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
self.get_pin_mut().poll_write_vectored(cx, bufs)
}
fn is_write_vectored(&self) -> bool {
self.get_ref().is_write_vectored()
}
fn poll_flush(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.get_pin_mut().poll_flush(cx)
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.get_pin_mut().poll_shutdown(cx)
}
}
impl<R: fmt::Debug> fmt::Debug for BufReader<R> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_struct("BufReader")
.field("reader", &self.inner)
.field(
"buffer",
&format_args!("{}/{}", self.cap - self.pos, self.buf.len()),
)
.finish()
}
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn assert_unpin() {
crate::is_unpin::<BufReader<()>>();
}
}