1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408
use std::io::{self, IoSlice};
use std::ops::DerefMut;
use std::pin::Pin;
use std::task::{Context, Poll};
/// Writes bytes asynchronously.
///
/// The trait inherits from [`std::io::Write`] and indicates that an I/O object is
/// **nonblocking**. All non-blocking I/O objects must return an error when
/// bytes cannot be written instead of blocking the current thread.
///
/// Specifically, this means that the [`poll_write`] function will return one of
/// the following:
///
/// * `Poll::Ready(Ok(n))` means that `n` bytes of data was immediately
/// written.
///
/// * `Poll::Pending` means that no data was written from the buffer
/// provided. The I/O object is not currently writable but may become writable
/// in the future. Most importantly, **the current future's task is scheduled
/// to get unparked when the object is writable**. This means that like
/// `Future::poll` you'll receive a notification when the I/O object is
/// writable again.
///
/// * `Poll::Ready(Err(e))` for other errors are standard I/O errors coming from the
/// underlying object.
///
/// This trait importantly means that the [`write`][stdwrite] method only works in
/// the context of a future's task. The object may panic if used outside of a task.
///
/// Note that this trait also represents that the [`Write::flush`][stdflush] method
/// works very similarly to the `write` method, notably that `Ok(())` means that the
/// writer has successfully been flushed, a "would block" error means that the
/// current task is ready to receive a notification when flushing can make more
/// progress, and otherwise normal errors can happen as well.
///
/// Utilities for working with `AsyncWrite` values are provided by
/// [`AsyncWriteExt`].
///
/// [`std::io::Write`]: std::io::Write
/// [`poll_write`]: AsyncWrite::poll_write()
/// [stdwrite]: std::io::Write::write()
/// [stdflush]: std::io::Write::flush()
/// [`AsyncWriteExt`]: crate::io::AsyncWriteExt
pub trait AsyncWrite {
/// Attempt to write bytes from `buf` into the object.
///
/// On success, returns `Poll::Ready(Ok(num_bytes_written))`. If successful,
/// then it must be guaranteed that `n <= buf.len()`. A return value of `0`
/// typically means that the underlying object is no longer able to accept
/// bytes and will likely not be able to in the future as well, or that the
/// buffer provided is empty.
///
/// If the object is not ready for writing, the method returns
/// `Poll::Pending` and arranges for the current task (via
/// `cx.waker()`) to receive a notification when the object becomes
/// writable or is closed.
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, io::Error>>;
/// Attempts to flush the object, ensuring that any buffered data reach
/// their destination.
///
/// On success, returns `Poll::Ready(Ok(()))`.
///
/// If flushing cannot immediately complete, this method returns
/// `Poll::Pending` and arranges for the current task (via
/// `cx.waker()`) to receive a notification when the object can make
/// progress towards flushing.
fn poll_flush(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), io::Error>>;
/// Initiates or attempts to shut down this writer, returning success when
/// the I/O connection has completely shut down.
///
/// This method is intended to be used for asynchronous shutdown of I/O
/// connections. For example this is suitable for implementing shutdown of a
/// TLS connection or calling `TcpStream::shutdown` on a proxied connection.
/// Protocols sometimes need to flush out final pieces of data or otherwise
/// perform a graceful shutdown handshake, reading/writing more data as
/// appropriate. This method is the hook for such protocols to implement the
/// graceful shutdown logic.
///
/// This `shutdown` method is required by implementers of the
/// `AsyncWrite` trait. Wrappers typically just want to proxy this call
/// through to the wrapped type, and base types will typically implement
/// shutdown logic here or just return `Ok(().into())`. Note that if you're
/// wrapping an underlying `AsyncWrite` a call to `shutdown` implies that
/// transitively the entire stream has been shut down. After your wrapper's
/// shutdown logic has been executed you should shut down the underlying
/// stream.
///
/// Invocation of a `shutdown` implies an invocation of `flush`. Once this
/// method returns `Ready` it implies that a flush successfully happened
/// before the shutdown happened. That is, callers don't need to call
/// `flush` before calling `shutdown`. They can rely that by calling
/// `shutdown` any pending buffered data will be written out.
///
/// # Return value
///
/// This function returns a `Poll<io::Result<()>>` classified as such:
///
/// * `Poll::Ready(Ok(()))` - indicates that the connection was
/// successfully shut down and is now safe to deallocate/drop/close
/// resources associated with it. This method means that the current task
/// will no longer receive any notifications due to this method and the
/// I/O object itself is likely no longer usable.
///
/// * `Poll::Pending` - indicates that shutdown is initiated but could
/// not complete just yet. This may mean that more I/O needs to happen to
/// continue this shutdown operation. The current task is scheduled to
/// receive a notification when it's otherwise ready to continue the
/// shutdown operation. When woken up this method should be called again.
///
/// * `Poll::Ready(Err(e))` - indicates a fatal error has happened with shutdown,
/// indicating that the shutdown operation did not complete successfully.
/// This typically means that the I/O object is no longer usable.
///
/// # Errors
///
/// This function can return normal I/O errors through `Err`, described
/// above. Additionally this method may also render the underlying
/// `Write::write` method no longer usable (e.g. will return errors in the
/// future). It's recommended that once `shutdown` is called the
/// `write` method is no longer called.
///
/// # Panics
///
/// This function will panic if not called within the context of a future's
/// task.
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), io::Error>>;
/// Like [`poll_write`], except that it writes from a slice of buffers.
///
/// Data is copied from each buffer in order, with the final buffer
/// read from possibly being only partially consumed. This method must
/// behave as a call to [`write`] with the buffers concatenated would.
///
/// The default implementation calls [`poll_write`] with either the first nonempty
/// buffer provided, or an empty one if none exists.
///
/// On success, returns `Poll::Ready(Ok(num_bytes_written))`.
///
/// If the object is not ready for writing, the method returns
/// `Poll::Pending` and arranges for the current task (via
/// `cx.waker()`) to receive a notification when the object becomes
/// writable or is closed.
///
/// # Note
///
/// This should be implemented as a single "atomic" write action. If any
/// data has been partially written, it is wrong to return an error or
/// pending.
///
/// [`poll_write`]: AsyncWrite::poll_write
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<Result<usize, io::Error>> {
let buf = bufs
.iter()
.find(|b| !b.is_empty())
.map_or(&[][..], |b| &**b);
self.poll_write(cx, buf)
}
/// Determines if this writer has an efficient [`poll_write_vectored`]
/// implementation.
///
/// If a writer does not override the default [`poll_write_vectored`]
/// implementation, code using it may want to avoid the method all together
/// and coalesce writes into a single buffer for higher performance.
///
/// The default implementation returns `false`.
///
/// [`poll_write_vectored`]: AsyncWrite::poll_write_vectored
fn is_write_vectored(&self) -> bool {
false
}
}
macro_rules! deref_async_write {
() => {
fn poll_write(
mut self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
Pin::new(&mut **self).poll_write(cx, buf)
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Pin::new(&mut **self).poll_write_vectored(cx, bufs)
}
fn is_write_vectored(&self) -> bool {
(**self).is_write_vectored()
}
fn poll_flush(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
Pin::new(&mut **self).poll_flush(cx)
}
fn poll_shutdown(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
Pin::new(&mut **self).poll_shutdown(cx)
}
};
}
impl<T: ?Sized + AsyncWrite + Unpin> AsyncWrite for Box<T> {
deref_async_write!();
}
impl<T: ?Sized + AsyncWrite + Unpin> AsyncWrite for &mut T {
deref_async_write!();
}
impl<P> AsyncWrite for Pin<P>
where
P: DerefMut + Unpin,
P::Target: AsyncWrite,
{
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
self.get_mut().as_mut().poll_write(cx, buf)
}
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
self.get_mut().as_mut().poll_write_vectored(cx, bufs)
}
fn is_write_vectored(&self) -> bool {
(**self).is_write_vectored()
}
fn poll_flush(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.get_mut().as_mut().poll_flush(cx)
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.get_mut().as_mut().poll_shutdown(cx)
}
}
impl AsyncWrite for Vec<u8> {
fn poll_write(
self: Pin<&mut Self>,
_cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
self.get_mut().extend_from_slice(buf);
Poll::Ready(Ok(buf.len()))
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write_vectored(&mut *self, bufs))
}
fn is_write_vectored(&self) -> bool {
true
}
fn poll_flush(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(Ok(()))
}
fn poll_shutdown(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(Ok(()))
}
}
impl AsyncWrite for io::Cursor<&mut [u8]> {
fn poll_write(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write(&mut *self, buf))
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write_vectored(&mut *self, bufs))
}
fn is_write_vectored(&self) -> bool {
true
}
fn poll_flush(mut self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(io::Write::flush(&mut *self))
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.poll_flush(cx)
}
}
impl AsyncWrite for io::Cursor<&mut Vec<u8>> {
fn poll_write(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write(&mut *self, buf))
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write_vectored(&mut *self, bufs))
}
fn is_write_vectored(&self) -> bool {
true
}
fn poll_flush(mut self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(io::Write::flush(&mut *self))
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.poll_flush(cx)
}
}
impl AsyncWrite for io::Cursor<Vec<u8>> {
fn poll_write(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write(&mut *self, buf))
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write_vectored(&mut *self, bufs))
}
fn is_write_vectored(&self) -> bool {
true
}
fn poll_flush(mut self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(io::Write::flush(&mut *self))
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.poll_flush(cx)
}
}
impl AsyncWrite for io::Cursor<Box<[u8]>> {
fn poll_write(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write(&mut *self, buf))
}
fn poll_write_vectored(
mut self: Pin<&mut Self>,
_: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<io::Result<usize>> {
Poll::Ready(io::Write::write_vectored(&mut *self, bufs))
}
fn is_write_vectored(&self) -> bool {
true
}
fn poll_flush(mut self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
Poll::Ready(io::Write::flush(&mut *self))
}
fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
self.poll_flush(cx)
}
}